# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*- Mode: Makefile -*-
#
# Makefile.am - automake file for Raptor docs
#
# Copyright (C) 2000-2010, David Beckett http://www.dajobe.org/
# Copyright (C) 2000-2005, University of Bristol, UK http://www.bristol.ac.uk/
# 
# This package is Free Software and part of Redland http://librdf.org/
# 
# It is licensed under the following three licenses as alternatives:
#   1. GNU Lesser General Public License (LGPL) V2.1 or any newer version
#   2. GNU General Public License (GPL) V2 or any newer version
#   3. Apache License, V2.0 or any newer version
# 
# You may not use this file except in compliance with at least one of
# the above three licenses.
# 
# See LICENSE.html or LICENSE.txt at the top of this package for the
# complete terms and further detail along with the license texts for
# the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively.
# 
# 

# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/build/gtk-doc.m4 \
	$(top_srcdir)/build/libtool.m4 \
	$(top_srcdir)/build/ltoptions.m4 \
	$(top_srcdir)/build/ltsugar.m4 \
	$(top_srcdir)/build/ltversion.m4 \
	$(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/build/pkg.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/raptor_config.h
CONFIG_CLEAN_FILES = version.xml
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man3dir = $(mandir)/man3
am__installdirs = "$(DESTDIR)$(man3dir)"
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BISON = @BISON@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURL_CONFIG = @CURL_CONFIG@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JING = @JING@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURL_CFLAGS = @LIBCURL_CFLAGS@
LIBCURL_LIBS = @LIBCURL_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_LIBS = @LIBXML_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MEM = @MEM@
MEM_LIBS = @MEM_LIBS@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PKG_CONFIG_REQUIRES = @PKG_CONFIG_REQUIRES@
RANLIB = @RANLIB@
RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@
RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@
RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@
RAPTOR_PARSERS = @RAPTOR_PARSERS@
RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@
RAPTOR_VERSION = @RAPTOR_VERSION@
RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@
RAPTOR_VERSION_MAJOR = @RAPTOR_VERSION_MAJOR@
RAPTOR_VERSION_MINOR = @RAPTOR_VERSION_MINOR@
RAPTOR_VERSION_RELEASE = @RAPTOR_VERSION_RELEASE@
RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@
RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@
RECHO = @RECHO@
RECHO_C = @RECHO_C@
RECHO_N = @RECHO_N@
RPM_RELEASE = @RPM_RELEASE@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TAR = @TAR@
VERSION = @VERSION@
XML_CONFIG = @XML_CONFIG@
XSLT_CONFIG = @XSLT_CONFIG@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# The name of the module.
DOC_MODULE = raptor2

# The top-level SGML file.
DOC_MAIN_SGML_FILE = raptor-docs.xml

# Extra options to supply to gtkdoc-scan
SCAN_OPTIONS = --deprecated-guards="RAPTOR_DISABLE_DEPRECATED"

# The directory containing the source code. Relative to $(srcdir)
DOC_SOURCE_DIR = ../src

# Used for dependencies
HFILE_GLOB = $(builddir)/raptor-fake.h
CFILE_GLOB = $(top_srcdir)/src/raptor_*.c
IGNORE_CFILES = \
n3_lexer.c \
n3_parser.c \
raptor_nfc_test.c \
raptor_rss_common.c \
raptor_xsd.c \
turtle_lexer.c \
turtle_parser.c \
turtle_common.c \
parsedate.c \
strcasecmp.c


# Use fixed version of raptor2.h
EXTRA_HFILES = $(builddir)/raptor-fake.h

# Headers to ignore: yes raptor2.h is intended to be in this list
# since it is added as a fixed file raptor-fake.h by EXTRA_HFILES above
IGNORE_HFILES = \
	n3_common.h \
	n3_lexer.h \
	n3_parser.h \
	parsedate.h \
	raptor.h \
	raptor2.h \
	raptor_config.h \
	raptor_internal.h \
	raptor_nfc.h \
	raptor_rss.h \
	turtle_common.h \
	turtle_lexer.h \
	turtle_parser.h \
	git-version.h


# CFLAGS and LDFLAGS for compiling scan program. Only needed
# if $(DOC_MODULE).types is non-empty.
AM_CPPFLAGS = 
GTKDOC_LIBS = 

# Extra options to supply to gtkdoc-mkdb
MKDB_OPTIONS = --sgml-mode --output-format=xml --ignore-files="$(IGNORE_CFILES)"

# Extra options to supply to gtkdoc-mktmpl
MKTMPL_OPTIONS = 

# Non-autogenerated (XML, other) files to be included in $(DOC_MAIN_SGML_FILE)
content_files = \
	raptor-changes.xml \
	raptor-formats.xml \
	raptor-parsers.xml \
	raptor-serializers.xml \
	raptor-tutorial-intro.xml \
	raptor-tutorial-querying-functionality.xml \
	raptor-tutorial-parsing.xml \
	raptor-tutorial-serializing.xml \
	version.xml \
	rdfprint.c \
	rdfcat.c \
	rdfserialize.c


# Images to copy into HTML directory
HTML_IMAGES = 

# Extra options to supply to gtkdoc-fixref
FIXXREF_OPTIONS = 

# gtkdoc might not define this
DISTCLEANFILES = raptor-fake.h
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = 
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
SETUP_FILES = \
	$(content_files)		\
	$(DOC_MAIN_SGML_FILE)		\
	$(DOC_MODULE)-sections.txt	\
	$(DOC_MODULE)-overrides.txt

EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) libraptor2.html \
	raptor1-eol.html $(man_MANS) version.xml.in upgrade-script.pl \
	raptor-changes.tsv
DOC_STAMPS = setup-build.stamp scan-build.stamp tmpl-build.stamp sgml-build.stamp \
	html-build.stamp pdf-build.stamp \
	tmpl.stamp sgml.stamp html.stamp pdf.stamp

SCANOBJ_FILES = \
	$(DOC_MODULE).args 	 \
	$(DOC_MODULE).hierarchy  \
	$(DOC_MODULE).interfaces \
	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = 
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = 
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp
man_MANS = libraptor2.3
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/gtk-doc.make:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man3: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man3dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.3[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
	done; }

uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man3dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.3[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(MANS) all-local
installdirs:
	for dir in "$(DESTDIR)$(man3dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man3

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local uninstall-man

uninstall-man: uninstall-man3

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local dist-hook distclean \
	distclean-generic distclean-libtool distclean-local distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-man3 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local uninstall-man uninstall-man3


@ENABLE_GTK_DOC_TRUE@all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
@ENABLE_GTK_DOC_FALSE@all-local:

docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)

$(REPORT_FILES): sgml-build.stamp

#### setup ####

setup-build.stamp:
	-@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    echo '  DOC   Preparing build'; \
	    files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \
	    if test "x$$files" != "x" ; then \
	        for file in $$files ; do \
	            test -f $(abs_srcdir)/$$file && \
	                cp -pu $(abs_srcdir)/$$file $(abs_builddir)/ || true; \
	        done; \
	    fi; \
	    test -d $(abs_srcdir)/tmpl && \
	        { cp -rp $(abs_srcdir)/tmpl $(abs_builddir)/; \
	        chmod -R u+w $(abs_builddir)/tmpl; } \
	fi
	@touch setup-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo '  DOC   Scanning header files'
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
	@if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    echo "  DOC   Introspecting gobjects"; \
	    scanobj_options=""; \
	    gtkdoc-scangobj 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	    if test "$(?)" = "0"; then \
	        if test "x$(V)" = "x1"; then \
	            scanobj_options="--verbose"; \
	        fi; \
	    fi; \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
	    gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
	else \
	    for i in $(SCANOBJ_FILES) ; do \
	        test -f $$i || touch $$i ; \
	    done \
	fi
	@touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
	@true

#### templates ####

tmpl-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
	@echo '  DOC   Rebuilding template files'
	@gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
	@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	  if test -w $(abs_srcdir) ; then \
	    cp -rp $(abs_builddir)/tmpl $(abs_srcdir)/; \
	  fi \
	fi
	@touch tmpl-build.stamp

tmpl.stamp: tmpl-build.stamp
	@true

$(srcdir)/tmpl/*.sgml:
	@true

#### xml ####

sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
	@echo '  DOC   Building XML'
	@-chmod -R u+w $(srcdir)
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
	@touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo '  DOC   Building HTML'
	@rm -rf html
	@mkdir html
	@mkhtml_options=""; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkhtml_options="$$mkhtml_options --verbose"; \
	  fi; \
	fi; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
	if test "$(?)" = "0"; then \
	  mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
	fi; \
	cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	-@test "x$(HTML_IMAGES)" = "x" || \
	for file in $(HTML_IMAGES) ; do \
	  if test -f $(abs_srcdir)/$$file ; then \
	    cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
	  fi; \
	  if test -f $(abs_builddir)/$$file ; then \
	    cp $(abs_builddir)/$$file $(abs_builddir)/html; \
	  fi; \
	done;
	@echo '  DOC   Fixing cross-references'
	@gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	@touch html-build.stamp

#### pdf ####

pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo '  DOC   Building PDF'
	@rm -f $(DOC_MODULE).pdf
	@mkpdf_options=""; \
	gtkdoc-mkpdf 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkpdf_options="$$mkpdf_options --verbose"; \
	  fi; \
	fi; \
	if test "x$(HTML_IMAGES)" != "x"; then \
	  for img in $(HTML_IMAGES); do \
	    part=`dirname $$img`; \
	    echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
	    if test $$? != 0; then \
	      mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
	    fi; \
	  done; \
	fi; \
	gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
	@touch pdf-build.stamp

##############

clean-local:
	@rm -f *~ *.bak
	@rm -rf .libs

distclean-local:
	@rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
	    $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
	@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \
	    rm -rf tmpl; \
	fi

maintainer-clean-local: clean
	@rm -rf xml html

install-data-local:
	@installfiles=`echo $(builddir)/html/*`; \
	if test "$$installfiles" = '$(builddir)/html/*'; \
	then echo 1>&2 'Nothing to install' ; \
	else \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	  else \
	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
	  fi; \
	  $(mkinstalldirs) $${installdir} ; \
	  for i in $$installfiles; do \
	    echo ' $(INSTALL_DATA) '$$i ; \
	    $(INSTALL_DATA) $$i $${installdir}; \
	  done; \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
	  fi; \
	  $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
	fi

uninstall-local:
	@if test -n "$(DOC_MODULE_VERSION)"; then \
	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	else \
	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
	fi; \
	rm -rf $${installdir}

#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@	@echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	@mkdir $(distdir)/tmpl
	@mkdir $(distdir)/html
	@-cp ./tmpl/*.sgml $(distdir)/tmpl
	@cp ./html/* $(distdir)/html
	@-cp ./$(DOC_MODULE).pdf $(distdir)/
	@-cp ./$(DOC_MODULE).types $(distdir)/
	@-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
	@cd $(distdir) && rm -f $(DISTCLEANFILES)
	@$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

raptor-fake.h: $(top_builddir)/src/raptor2.h $(top_srcdir)/scripts/fix-gtkdoc-header.pl
	$(PERL) $(top_srcdir)/scripts/fix-gtkdoc-header.pl < $< > $@

@MAINTAINER_MODE_TRUE@libraptor2.html: $(srcdir)/libraptor2.3 $(top_srcdir)/scripts/fix-groff-xhtml
@MAINTAINER_MODE_TRUE@	-groff -man -Thtml -P-l $< | tidy -asxml -wrap 1000 2>/dev/null | $(PERL) $(top_srcdir)/scripts/fix-groff-xhtml $@

@MAINTAINER_MODE_TRUE@rdfcat.c: $(top_srcdir)/examples/rdfcat.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@rdfprint.c: $(top_srcdir)/examples/rdfprint.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@rdfserialize.c: $(top_srcdir)/examples/rdfserialize.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@raptor-tutorial-parsing.xml: rdfcat.c

@MAINTAINER_MODE_TRUE@raptor-tutorial-serializing.xml: rdfprint.c rdfserialize.c

@MAINTAINER_MODE_TRUE@raptor-changes.xml: $(srcdir)/raptor-changes.tsv $(top_srcdir)/scripts/process-changes.pl
@MAINTAINER_MODE_TRUE@	$(PERL) $(top_srcdir)/scripts/process-changes.pl --docbook-xml $@ $(PACKAGE) $(srcdir)/raptor-changes.tsv

@MAINTAINER_MODE_TRUE@raptor-formats.xml: $(top_builddir)/scripts/build-formats
@MAINTAINER_MODE_TRUE@	$(top_builddir)/scripts/build-formats > $@

@MAINTAINER_MODE_TRUE@$(top_builddir)/scripts/build-formats:
@MAINTAINER_MODE_TRUE@	cd $(top_builddir)/scripts && $(MAKE) build-formats

@MAINTAINER_MODE_TRUE@upgrade-script.pl: $(top_srcdir)/scripts/process-changes.pl $(srcdir)/raptor-changes.tsv
@MAINTAINER_MODE_TRUE@	$(PERL) $(top_srcdir)/scripts/process-changes.pl --upgrade-script $@ $(PACKAGE) $(srcdir)/raptor-changes.tsv

dist-hook-local: docs

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
